Record raw data

Preparation

Before you connect your device, it is important that you do the following:

1. Read the introduction and installation guide in the CLX000 Docs
2. Verify that the pin-out of your application, adapter cable & CLX000 match

---

Verify that you can log data

1. Connect & power the CLX000 in your application via the DB9 connector (green LED lights up)
2. Verify that the device records data to the SD card (yellow & red LEDs blink)
3. Disconnect the device and connect it via USB to your PC
4. Confirm that the SD contains a *.TXT log file

Before you deploy your unit in the field, we strongly recommend to review our tips & tricks. If you’re having trouble logging data, see our troubleshooting section.