Connect
This page documents the connect configuration.
The connect configuration defines the parameters needed for the CANedge3 GNSS to gain network access.
Warning
Make sure that the network allows communication on the network port(s) used by the CANedge3 GNSS (e.g. port 9000 for S3).
The connect configuration is split into the following sections.
Cellular
Configuration of how the CANedge3 GNSS gains network access through cellular. For more information on the device Cellular support, see Connectivity.
Protocol
Configuration of the protocol used to communicate with the device over the network.
Protocol - S3
Configuration of how the CANedge should communicate with a S3 server.
See the following sections for more information on the S3 interface and how to use it with the CANedge: