Cellular
This page documents the cellular configuration
Table of Contents
Configuration file fields
This section is autogenerated from the Rule Schema file.
Key format connect.cellular.keyformat
The format of the password(s). Can be used to hide the sensitive credentials stored on the device.
Type |
Default |
Options |
|---|---|---|
integer |
0 |
Plain: |
PIN connect.cellular.pin
Type |
Default |
|---|---|
string |
APN connect.cellular.apn
Access Point Name (APN).
Type |
Default |
Max length |
|---|---|---|
string |
62 |
Roaming connect.cellular.roaming
Enable to allow roaming.
Type |
Default |
Options |
|---|---|---|
integer |
0 |
Disabled: |
Configuration explained
This section contains additional information and examples.
PIN (pin)
Warning
The device enters the SIM-card PIN each time it boots. If the configuration file PIN is incorrect, the device uses one PIN attempt for each boot.
Note
The device does not support entering the SIM-card PUK code
APN (apn)
Some SIM-cards/operators require that the correct cellular-data APN is entered to be able to establish a data connection. The APN depends on the SIM-card provider.
Roaming (roaming)
Enable roaming to allow the device to use alternative carrier networks when outside range of the home network.
Note
Some SIM-cards are roaming only (i.e. no home network) and require roaming enabled to function
Warning
Roaming usually entails higher fees for data transfer