Legal information
Usage warning
Warning
Carefully review the below usage warning before installing the product
The use of the CANedge device must be done with caution and an understanding of the risks involved. The operation of the device may be dangerous as you may affect the operation and behavior of a data-bus system.
Improper installation or usage of the device can lead to serious malfunction, loss of data, equipment damage and physical injury. This is particularly relevant when the device is physically connected to an application that may be controlled via a data-bus. In this setup you can potentially cause an operational change in the system, turn on/off certain modules and functions or change to an unintended mode.
While the device supports a high degree of security in regards to wireless data transfer and over-the-air updates, it is recommended that these features are used with caution. Incorrect usage of this functionality can result in a device being unable to connect to your server. Further, changing e.g. transmit messages over-the-air should be done with extreme caution.
The device should only be used by persons who are qualified/trained, understand the risks and understand how the device interacts with the system in which it is integrated.
Terms & conditions
Please refer to our general terms & conditions.
Electromagnetic compatibility
The CANedge has been tested in accordance with CE, FCC and IC standards.
Hardware version 00.03
CE certificate |
FCC certificate |
IC certificate
Hardware version \(\le\) 00.02
CE certificate |
FCC certificate |
IC certificate
The CANedge2 includes the following pre-certified wireless module: ATWINC1500U. Note that the ATWINC15x0-MR210UB module has been tested with an external whip antenna with a gain of 2.2dBi.
The device is in conformity with all provisions of Annex II of Council Directive 2014/30/EU, in its latest amended version, referred to EMC directive.
The device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
The device complies with the requirements set forth in the Innovation, Science and Economic Development Canada (ISED) Rules and Regulations ICES-003 Class B and the measurement procedure according to CAN/CSA CISPR 22-10.
Specifically, it is in conformity with the following standards:
EN 55032:2015 - Electromagnetic Compatibility of Multimedia Equipment
EN 55024:2010+A1:2015 - IT equipment. Immunity characteristics. Limits and methods of measurement
FCC Rules and Regulations Part 15 Subpart B: 2018
ICES-003: Issue 6 January 2016
Voltage transient tests
The CANedge has passed below ISO 7637-2:2011 tests, performed by TÜV SÜD1:
ISO 7637-2:2011: Voltage transient emissions test on supply lines
ISO 7637-2:2011: Transient immunity test on supply lines
Contact details
For any questions regarding our products, please contact us:
- 1
Test performed using the hardware version \(\le\) 00.02 enclosure