Connector
The CL2000 uses a DB9 (D-sub9) connector for supply and CAN-bus and a mini-USB connector for configuration, access to log files and firmware update.
DB9
DB9 connector for supply and CAN-bus.
Pin # |
DB9 connector |
|---|---|
1 |
NC |
2 |
CAN L |
3 |
GND |
4 |
NC |
5 |
NC |
6 |
GND (optional) |
7 |
CAN H |
8 |
NC |
9 |
Supply (7-32 V) |
Note
Pin 6 can be connected to GND or left Not-Connected.
USB
The mini-USB connector is used to access the internal memory (and streaming interface).
