Introduction

Note

The CANmod.input can be installed stand-alone in 5 V / 12 V / 24 V systems or can be used with the CANedge series of data loggers[1].

The CANmod.input is a eight-channel analog, digital, and pulse input module. Each channel can be configured as an analog, digital or pulse input. See the specification for more information on the input channels.

The output signals are transmitted via CAN-bus. The CAN-bus ID, ID format and frequency can be configured individually for each output signal. Additionally, the module can be configured in “poll-mode” to only provide data on requests.

For a full list of signals refer to the Signals specification. The signals are also described in a DBC file format.

Note

The decoding rules are defined by the provided CANmod.input DBC file

---

[1]

The CANedge can power the CANmod.input from the 2nd port (CH2). Remember to enable the power output and match the bit-rate between the two devices.