Introduction

Note

Most of the detailed technical information contained in this manual can be found by exploring the configuration section.

The CANmod.gps is a combined positioning (GNSS) and 3D inertial (IMU) sensor module. The best possible positioning information is obtained by combining signals from a variety of GNSS (GPS, GLONASS, Galileo, BeiDou). The IMU provides 3 x acceleration + 3 x gyroscope readings.

For automotive applications, the module supports a sensor-fusion model which uses information from both the GNSS and the IMU to provide improved positioning information - particularly in places with GNSS-denied conditions and outages.

The module can be integrated into existing CAN-bus applications to add position information.

The output signals are transmitted via CAN-bus. The CAN-bus ID, ID format and frequency can be configured individually for each output signal. Additionally, the module can be configured in “poll-mode” to only provide data on requests.

For a full list of signals refer to the Signals specification and the Signals database

Note

The decoding rules are defined by the provided CANmod.gps DBC file