# Change Log All notable changes to CANvas will be documented in this file. Note that changes listed in the "Unreleased" section have not yet been released. ## [3.6.6] - 2020-03-17 ### Changed - Improved the Wireshark live stream guidance text ## [3.6.5] - 2020-01-30 ### Changed - Added support for Firmware 5.8x ## [3.6.4] - 2018-12-19 ### Changed - Added correct timestamp for conversion to other formats (asc, trc) for Vector/PEAK compatibility ## [3.6.3] - 2018-08-10 ### Changed - Minor bug fixes ## [3.6.2] - 2018-07-12 ### Changed - Added all Mode 01 "Supported OBD2 PID" request messages to transmit list, to ease validation of available parameters - Added conversion support for all Mode 01 "Supported OBD2 PID", to translate the data to easily see what parameters are available ### Fixed - RTC epoch time reset bug present on some systems ## [3.6.1] - 2018-05-22 ### Changed - Improved filter setting algorithm with 8 channels ### Fixed - Various bugs ## [3.6.0] - 2018-04-24 ### Added - Support for firmware 5.6x and 5.7x ### Fixed - Various bugs ## [3.5.3] - 2018-04-15 ### Changed - Text and tooltips ## [3.5.2] - 2018-04-08 ### Fixed - Allow installing of wirePlugin when plugins not already present - Various bugs ## [3.5.1] - 2018-03-25 ### Fixed - Memory usage and speed optimized. - Various bugs ## [3.5.0] - 2018-03-05 ### Added - Option to split timestamp into separate columns when converting log files - Option to concatenate output to existing converted file - Option to exclude header columns when converting files ### Changed - Always set conversion timestamp to full format ### Fixed - Out of memory issues when converting large amount of data - Various minor bugs ## [3.4.3] - 2018-02-15 ### Fixed - Loading OBD transmit sometimes causes access violation - Long FTP directory causes crash ### Changed - Improved method for reporting unhandled exceptions ## [3.4.2] - 2018-01-27 ### Added - FTP and WiFi test buttons - Link to website Guides - Always save configration settings file (config.xml) with config.ini file - Check if firmware on logger matches with CANvas verison if a logger is connected to the PC ### Fixed - LogFile to Canalyzer format always returning 8 bytes, now returning bytes present - Loading config.xml configuration file not always working. - Various minor bugs ### Changed - Merge Export and Save buttons for config.ini file and config.xml file - Default load and save directory for config file set to logger if connected to the PC - LogFile to Canalyzer format changed to always return 2 digit bytes ## {3.4.1] - 2017-12-10 ### Added - Support for firmware 5.5x - Download files from ftp server for auto-conversion. - Upload auto-converted files to ftp server ### Fixed - Saved Id's not loading - Various minor bugs. ## [3.4.0] - 2017-11-19 ### Added - Support for firmware 5.50 - Auto conversion that monitors a folder and convert files - Second Msg allowed in conversion rule for OBD2 support - Prespecified conversion databases included (OBD2, FMS Truck and Bus) - Prespecified list of OBD2 Transmit messages in logger configuration ### Fixed - Various minor bugs ## [3.3.4] - 2017-10-22 ### Changed - Conversion xml file layout changed when saving database settings ## [3.3.3] - 2017-10-19 ### Fixed - Library embedded in executable ## [3.3.2] - 2017-09-29 ### Added - Conversion file preview window ### Changed - Dynamic file splitting working on output lines and not input lines ### Fixed - File header time format during file conversion when keeping log file settings - Conversion progress bar not always updating correctly - Converting with scaled values not including all lines. ## [3.3.1] - 2017-09-14 ### Added - Option to change timestamp format and separators during log file conversion ### Changed - Downsampling maximum frequency increased ### Fixed - Bug in bit-rate selection - Various tooltips and shortcuts - Dynamic file splitting not spliiting as intended - Live stream status not updating correctly ## [3.3.0] - 2017-09-03 ### Added - Support for the CL3000 - Support for firmware 5.40 - Additional output options when converting log files e.g. merge log files and add statistics - LoggerID added to input file selection overview ### Changed - Font changed to Comfortaa - Support link destination and text ### Fixed - Various minor bugs ## [3.2.2] - 2017-08-12 ### Added - Support for Firmware 5.33 ## [3.2.1] - 2017-07-01 ### Fixed - Selection of all input files not enabling conversion tab ## [3.2.0] - 2017-06-30 ### Added - Support for Firmware 5.32 - Support for .dbc files in convertion tool ### Fixed - Performance of live stream ## [3.1.1 beta] - 2017-06-05 ### Fixed - Data convertion with firmware 5.31 not always returning data. ## [3.1.0 beta] - 2017-05-15 ### Added - Support for Firmware 5.31 - Live stream of CAN traffic by piping data to Wireshark or Wireshark Legacy. ## [3.0.0] - 2017-04-29 ### Added - Support for Firmware 5.30 - Transmit list with messages to be sent by the logger. ### Removed - Optional sequence number in log file ### Fixed - Invalid input in entry designer not validated when applying changes ## [2.9] - 2016-12-27 ### Changed - Improved activity log in error report ### Fixed - Down-sampling with datatype Single always returning zero - Scenario with both little and big endian and only standard or extended ID conversion rules not returning all messages - Delete-row button not disabling when loading empty database ## [2.8] - 2016-12-22 ### Added - Check user .NET version on application startup ### Changed - Include screenshot of application in error report ### Fixed - Conversion tool not requirering dll's at runtime ## [2.7] - 2016-12-09 ### Added - Support for firmware 5.20 - Inclusion of terms and conditions first time program is used - Use last used read and write paths as initial paths for new read and writes ### Changed - Handling of global errors - send bug reports if connection can be established over port 587, given user accept ### Fixed - Delete-column button not enabling correctly when loading database file with conversion rules - Output file column header not using log-file delimiter when additional columns included in output ## [2.6] - 2016-11-19 ### Fixed - Some IDs not returned when using little endian and CAN message has less than 8 data bytes - Tooltip title not always changing as intended ## [2.5] - 2016-11-17 ### Fixed - Signed Integer calculation (positive numbers not represented correctly). Method used is Two's complement ## [2.4] - 2016-11-12 ### Added - Support for different data types when converting data (bool, signed int, single, double, string) ### Changed - Updated unhandled error reporting ## [2.3] - 2016-09-20 ### Added - Live preview of log file output - Tooltips to "ID ranges" datagridview - Manage unhandled errors ## [2.2] - 2016-09-12 ### Added - Allow space in input file path ### Changed - Updated tooltips, messages, checkbox text, and tab titles ### Fixed - LoggerID was not loaded when opening an .xml with settings - Edit mode preview did not display correctly if buttons were double clicked - Tabs were not displayed corretly if conversion rule was enabled with double click ## [2.1] - 2016-09-03 ### Changed - Added support for CLX000 firmware 5.13